Hi Stefan, It would be great to receive a full snippet of config. Thanks!
Remco Stefan Fouant wrote: > I'm on my Blackberry so I can't give you the full config right now but > you need to get rid of that 'port automatic' command as that will > enable PAT. Give me a few minutes and I will post the rest of the > configuration. > > Stefan Fouant > Principal Network Engineer > NeuStar, Inc. - http://www.neustar.biz > > > > On 6/17/08, Remco Bressers <[EMAIL PROTECTED]> wrote: >> I'm working on a NAT setup, which is actually very straightforward but i >> still am puzzled by the services documentation from Juniper. Please help :). >> >> It's a J2300 with 2 interfaces, in and out. One public IP address and a >> local subnet on the inside. I got the network translation from the >> inside to the public ip working, but now i want to configure one single >> port-forward to an internal host (let's say 10.0.0.1) on port 80. >> >> But how? On a cheap $50 router it's a point-and-click, but it's not even >> in J-web?! >> >> >> The config i have now : >> >> >> services { >> service-set wan-service-set { >> nat-rules nat-set; >> interface-service { >> service-interface sp-0/0/0; >> } >> } >> nat { >> pool nat-pool { >> address-range low 217.21.x.x high 217.21.x.x; >> port automatic; >> } >> rule nat-set { >> match-direction input; >> term 1 { >> from >> then { >> translated { >> source-pool nat-pool; >> translation-type { >> source dynamic; >> } >> } >> } >> } >> } >> } >> } >> >> >> >> -- >> Kind regards, >> Signet bv >> >> >> Remco Bressers >> >> T 040 - 707 4 907 >> F 040 - 707 4 909 >> E [EMAIL PROTECTED] >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > -- Met vriendelijke groet, Signet bv Remco Bressers T 040 - 707 4 907 F 040 - 707 4 909 E [EMAIL PROTECTED] altijd online? www.signet.nl _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
