Hi Richard, That's indeed what I'm referring to. Although it might technically work (which I assume does) I wouldn't recommend that 'hack' for it would risk more than doing good :)
Cheers, Erdem On Thu, Jun 19, 2008 at 8:07 AM, Richard A Steenbergen <[EMAIL PROTECTED]> wrote: > On Wed, Jun 18, 2008 at 11:56:46PM +0200, Erdem Sener wrote: >> Hello, >> >> Current JUNOS versions only support CLI commands to be triggered via >> op/event scripts. This means that you can't >> currently trigger a configuration change (delete route, deactivate >> neighbor, change localpref etc) based on those. >> >> Altering of the configuration via op/event scripts will be supported >> in 9.3 onwards. > > Technically you can make changes to the candidate configuration from an > op/event script just fine, just use the edit-config rpc. The gotcha is > that you can't actually commit the changes from script due to locking > issues. Is this what you're referring to as being fixed in 9.3? > > It's been a while since I asked about this one, but you can ghetto-rig it > in a few cases with a netconf system that commits the configuration after > calling the op script. :) > > -- > Richard A Steenbergen <[EMAIL PROTECTED]> http://www.e-gerbil.net/ras > GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
