JTAC said it's either hardware (mostly PIC) or Cable issue. I replaced fiber, XENPACK and PIC but the alerts came back.
Thanks, Peter On Sat, Jun 28, 2008 at 12:05 AM, Vineet Venugopal < [EMAIL PROTECTED]> wrote: > hi Peter > > Can you clean teh fiber connected on this port and check if the error > clears off > > Thanks > Vineet > > On 6/27/08, Mark Tinka <[EMAIL PROTECTED]> wrote: > > On Friday 27 June 2008 09:28:26 pm PETER CHON wrote: > > > > > Hi, > > > One of my M320 syslog has full of following msgs. > > > > > > m320-router fpc6 .pm3393.6.0. RXXG: Packet exceeds the > > > maximum frame size 9204 > > > m320-router fpc6 .pm3393.6.0. RXXG: A line interface > > > error is detected > > > > > > I replaced hardware per JTAC recommendation. > > > Anyone knows what this alert for? > > > > You mean JTAC didn't tell you before they got you to replace > > the hardware? > > > > Mark. > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > > -- > ---Vineet > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>> People will forget what you said, People will forget what you did, But people will never forget how you made them feel. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
