Hi Guys, I am getting a lot of invalid netmask errors in my OSPF on a J2320. I have in total 6 cisco ospf talking switches and 2 j2320's on my network (All in area 0.0.0.0). The J2320 showing the error is linked to two separate switches (Gigabit Ethernet, each link has its own /29 (However in the same vlan)), which are in turn linked to each other. My other J2320 is linked to a down stream ospf talking switch. I am not seeing any ospf errors on my other router at all.
JTAC have had all of the diagnosis info and tell me they cannot see an error at all, however I have configured snmp alerts and am getting 2 every couple of seconds telling me there is an invalid netmask. Is there anyway to get it to tell me said invalid netmask so that I can take a look? Could it be because my two links are in the same vlan (switch1 is linked in VLAN810 to ge-0/0/0 on my router and switch2 is linked in VLAN810 to ge-0/0/2 on my router) on my switches? Would separating them out make a difference? My other router cannot see the same problem but can see all of the networks over ospf. Thanks, Lee _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
