Yeah, it looks like the TS is on the built-in FPC and not on the RE. My bad.
Anyway, the main thrust of my question is answered - we can use our M7i routers to terminate/initiate GRE/IP-in-IP tunnels. Thanks all Dermot -----Original Message----- From: Scott Morris [mailto:[EMAIL PROTECTED] Sent: 15 July 2008 12:03 To: 'Eric Van Tol'; Dermot Williams; [email protected] Subject: RE: [j-nsp] Tunnel Services Well... Ok. So "The tunnel pic (or built in one) serves that function as well." should be followed up with: Perform a "show chassis hardware" and make sure you have one! :) M5, M10, M20, etc. don't automatically have one either! Scott -----Original Message----- From: Eric Van Tol [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 15, 2008 6:57 AM To: '[EMAIL PROTECTED]'; 'Dermot Williams'; [email protected] Subject: RE: [j-nsp] Tunnel Services > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:juniper-nsp- > [EMAIL PROTECTED] On Behalf Of Scott Morris > Sent: Tuesday, July 15, 2008 6:52 AM > To: 'Dermot Williams'; [email protected] > Subject: Re: [j-nsp] Tunnel Services > > An AS-PIC (or ASM) will terminate tunnels as well, but you don't need > to have it. The tunnel pic (or built in one) serves that function as > well. Actually, you do need it on an M10i, as the M7i is the only M-Series platform with a built-in tunnel PIC. -evt _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
