I have an working ipsec vpn with xauth.i use the shrew soft vpn client. can I just forward the requests to the RSA authentication manager instead of the local database? I tried it but with luck.
-----Original Message----- From: Stefan Fouant [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 16, 2008 5:17 PM To: sunnyday Cc: Juniper-Nsp; [EMAIL PROTECTED] Subject: Re: [j-nsp] Vpn with rsa For dial-up VPN applications, you can configure an Auth or L2TP user and authenticate them against the SecurID database. I would recommend configuring an Auth user as the SecurID cannot assign remote settings to an L2TP user. Once you've configured your Auth user account and set up authentication against the SecurID server, it's really just a simple matter of specifying the Auth user in the IKE Phase 1 profile. For more information, you are really going to need to dig into the manuals. The "ScreenOS Concepts and Examples Guide Volume 9: User Authentiation" should provide you an ample starting point. HTHs. On Wed, Jul 16, 2008 at 3:52 AM, sunnyday <[EMAIL PROTECTED]> wrote: > I need to configure (if possible ) a vpn with rsa authentication.i have some > tokens which generate the tokens codes and have setup the securID server. > > I already have a IPSEC vpn. I need to know what steps to take to use rsa > tokens to authenticate when requesting access to the vpn. > > Any help appreciated. > > Thank you > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Stefan Fouant Principal Network Engineer NeuStar, Inc. - http://www.neustar.biz GPG Key ID: 0xB5E3803D _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
