If I recall correctly, you are using Xauth. As I mentioned in a previous post, ScreenOS does not support the assignment of remote settings such as IP addresses using Xauth. In most cases you do not need to assign an address to the tunnel in order to get the tunnel operational, but if this is a requirement for your network you'll need to switch from that ShrewSoft client to something else that supports AUTH authentication.
HTHs. On 7/21/08, sunnyday <[EMAIL PROTECTED]> wrote: > I have set up a vpn to authenticate to an external SecureID server the > authentication requests reach the server and authentication is successful as > I can see through the logs of the SecureID server > > But my problem is that the dialup vpn client is unable to get an ip address. > How it possible to give the vpn client an ip address? > > Thank you > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Sent from Gmail for mobile | mobile.google.com Stefan Fouant Principal Network Engineer NeuStar, Inc. - http://www.neustar.biz GPG Key ID: 0xB5E3803D _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
