Well, although not documented to my knowledge, assigning a static IP via ppp to a pppoe interface and referencing it in a mip seems to work. ScreenOS somehow holds the last ppp-assigned IP sticky in the config so the MIP is valid even after a reboot. Surely this is a dirty hack though ;) Is there some official way to do this?
Thanks and regards, sven03 Sven Juergensen (KielNET) wrote: | Hi list, | | is it possible to have a static PAT on | ScreenOS when the external (public/WAN) | IP-Address is dynamic and point-to-point? | | E.g. have port 25 on the external IP map | to a single private (1918) internal host? | | VIPs seem to always reference a static IP | (destination PAT) and, like MIPs, require a | subnet on the external interface. | | Could someone suggest whether this works | and/or direct me to some sort of documen- | tation? | | Many thanks and regards, | | sven03 | | | Mit freundlichen Gruessen | | i. A. Sven Juergensen | Mit freundlichen Gruessen i. A. Sven Juergensen -- Fachbereich Informationstechnologie KielNET GmbH Gesellschaft fuer Kommunikation Preusserstr. 1-9, 24105 Kiel Telefon : 0431 / 2219-053 Telefax : 0431 / 2219-005 E-Mail : [EMAIL PROTECTED] Internet: http://www.kielnet.de Geschaeftsfuehrer Eberhard Schmidt HRB 4499 (Amtsgericht Kiel) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
