Great, thanks, Alex! After a second thought, using l2vpn-tcc full-mesh might not be a good idea. My understanding is that tcc basically strips the layer-2 header and re-write the layer-2 header on the other side. It seems that this would create excessive traffic cross-site, since there is no MAC learning involved.
-Simon On Wed, Jul 23, 2008 at 11:17 AM, Alex <[EMAIL PROTECTED]> wrote: > Simon, > You can do it with JUNOS "vlan-map" feature: popping or swapping a tag/tags > at the ingress PE (normalizing tags in the core) and pushing/swapping on > egress PE, requires GE IQ/IQ2 PICs > http://www.juniper.net/techpubs/software/junos/junos91/swconfig-network-interfaces/stacking-and-rewriting-gigabit-ethernet-iq-vlan-tags.html > Rgds > Alex > > ----- Original Message ----- From: "Simon Chen" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, July 23, 2008 3:30 PM > Subject: [j-nsp] bridging multiple vlans through VPLS > > >> Hi all, >> >> Is there a way to bridge three or more vlans with different vlan-ids >> into the same broadcasting domain using VPLS? I was looking for things >> like vpls+tcc but didn't have any luck... or maybe I should do this >> with a full-meshed l2vpn+tcc? >> >> Thanks. >> -Simon >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
