I have logged traffic at the interfaces and found that the router is using the loopback as source address for reaching the gateway When specifying the 2 interfaces the pings work How can I change the default selection of the loopback address?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of sunnyday Sent: Friday, July 25, 2008 1:12 PM To: Juniper-Nsp Subject: [j-nsp] load balance traffic Hello I have a j router with 2 adsl cards they have been assigned ip address from the bras. pp0.0 up up inet 10.11.11.7 --> 1.1.1.1 pp0.1 up up inet 10.11.11.8 --> 1.1.1.1 the problem is that only one adsl card(pp0.1) can ping the loopback(1.1.1.1) of the bras: 1.1.1.1/32 *[Direct/0] 00:23:33 > via pp0.1 [Direct/0] 00:23:33 > via pp0.0 10.11.11.7/32 *[Local/0] 00:27:34 Local via pp0.0 10.11.11.8/32 *[Local/0] 00:27:34 Local via pp0.1 Any ideas on how to change the behavior and have both interfaces forwarding for the gateway? _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
