Simon Just look at this: http://www.juniper.net/techpubs/software/junos/junos90/mx-solutions-guide/one-vpls-instance-for-several-vlans.html#id-vpls-many-vlans One VPLS Instance for Several VLANs routing-instances { customer-c1-v1-to-v1000 { instance-type vpls; vlan-id all; # Note the use of the VLAN id all statement interface ge-1/0/0.1; interface ge-2/0/0.1; interface ge-3/0/0.1;
I am ot sure that's the solution but perhaps it can help Regards Alain -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Simon Chen Envoyé : mercredi 13 août 2008 06:32 À : Juniper Puck Objet : [j-nsp] question regarding multiple interfaces in vpls (vlan-tagswap used) Hi all, I am having problems with VPLS again, and would like to ask for your help. Basically, I have multiple VPLS sites, each sites may host a few interfaces. The configure looks like this: interfaces { ge-0/1/0 { unit 0 { encapsulation vlan-vpls; vlan-id 513; input-vlan-map pop; output-vlan-map push; } unit 1 { encapsulation vlan-vpls; vlan-id 514; input-vlan-map pop; output-vlan-map push; } } } routing-instances { VPLS.0 { instance-type vpls; interface ge-0/1/0.0; // doesn't work when both enabled interface ge-0/1/0.1; route-distinguisher 7777:0; vrf-target target:7777:0; protocols { vpls { site-range 40; site PE.2 { site-identifier 2; } } } } } This doesn't work though, unless I only enable one of the interfaces in the VPLS interface for every site. Can anyone explain what's going on here and how I can fix it? Thanks a lot! -Simon _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
