Amos,
Possibly you can post a snippet of the logs from the ERX, and we can
take a look.
Regards,
Truman
On 13/08/2008, at 1:41 PM, Amos Rosenboim wrote:
Hello,
To add another piece of information - the problem is not related to
the radius.
I got to this conclusion because even when I configure a local user
with a specific IP address he is unable to connect.
The same user without the IP is able to connect.
When I log ppp packets on the ERX the difference between the
successful attempt and the unsuccessful is that in the successful
one the remote side sends pap auth request and the ERX responds with
pap authack and then proceeds to ipncp.
With the failed user the ERX does not respond with a pap authack.
Amos Rosenboim
[EMAIL PROTECTED]
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
