The policy is from untrust to global with source any destination MIP And no I dont have route.i don't understand the use of the route or what route to configure.
-----Original Message----- From: Stefan Fouant [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 02, 2008 4:27 PM To: SunnyDay; Juniper-Nsp Subject: Re: [j-nsp] MIP issue What specifically is your policy permitting and do you have a route which resolves back to the source of those ICMP echo-requests? On 5/31/05, SunnyDay <[EMAIL PROTECTED]> wrote: > Hello > > I have 1 adsl interface in the untrust zone and I have configured a loopback > with another public ip address > > And made the adsl member of loopback group.(the loopback interface). > > I now go to the loopback interface to configure a mip. > > Then I configure the policy from untrust to Testing zone. > > When I ping from the internet I see traffic on the policy logs coming in and > translated to the private address but ping fails. > > Thanks > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Sent from Gmail for mobile | mobile.google.com Stefan Fouant Principal Network Engineer NeuStar, Inc. - http://www.neustar.biz GPG Key ID: 0xB5E3803D _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
