Hi,
>From Cisco I remember that when an IP packet is labeled, the IP precedence
value is copied into MPLS experimental bits.
Is Juniper behaving the same way?
If so, why, for a identical bit pattern (e.g. 101) both MPLS EXP and IP
Precedence do not point to the same alias (e.g. ef)?
@M10i-re0> show class-of-service code-point-aliases exp
Code point type: exp
Alias Bit pattern
af11 100
af12 101
be 000
be1 001
cs6 110
cs7 111
ef 010
ef1 011
nc1 110
nc2 111
{master}
@M10i-re0> show class-of-service code-point-aliases inet-precedence
Code point type: inet-precedence
Alias Bit pattern
af11 001
af21 010
af31 011
af41 100
be 000
cs6 110
cs7 111
ef 101
nc1 110
nc2 111
Thanks
Christophe
P Please consider your environmental responsibility before printing this
e-mail
_____
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
