Hey Guys Thanks i tried i again after reading the config guides and i was able to do it.
regards abhijeet.c ----- Original Message ---- From: "Richmond, Jeff" <[EMAIL PROTECTED]> To: Abhi <[EMAIL PROTECTED]>; Juniper Puck <[email protected]> Sent: Friday, September 19, 2008 7:59:47 PM Subject: RE: [j-nsp] Router Reflector and L3 VPN support on same router How did it fail? I do this without issue. You might want to check your IBGP next-hop policy though if your problem is just missing routes. Also, if you have an RR client, make sure you add a static discard route in inet.3 or a 1-way LSP from the RR server to the client. Regards, -Jeff ________________________________________ From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Abhi [EMAIL PROTECTED] Sent: Friday, September 19, 2008 6:08 AM To: Juniper Puck Subject: [j-nsp] Router Reflector and L3 VPN support on same router Hi Every Body I am configuring Juniper router in a Lab Setup i am able to establish full mesh connectivity will configuring router to support L3 VPN functionality with other 3 router by explicitly configuring them. i tried configuring one of the Router to be RR and simultaneously be a peer for L3 VPN peer. It failed to work in this manner. 1) Can we do this if yes how. I know this would not have a practical application but we need to test the same. regards abhijeet.c _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
