On Monday 29 September 2008 04:08:49 David Ball wrote: > You can certainly use both LDP and RSVP on the Juniper > box with no problems. RSVP routes in inet3 are preferred > over LDP routes, so LDP can actually act as a bit of a > backup in case you had a massive RSVP failure. I'm doing > this in my network. > Can't speak for the Cisco.
Inter-op for LDP and RSVP between C and J works fine. Do take some time to look through these threads on the subject, though: http://puck.nether.net/pipermail/juniper-nsp/2008-June/010549.html http://puck.nether.net/pipermail/juniper-nsp/2008-May/010395.html http://puck.nether.net/pipermail/juniper-nsp/2008-April/010247.html On the Cisco side, note that it is generally recommended to tunnel LDP within RSVP, particularly if you're deploying l3vpn's. This is done by configuring 'mpls ip' on the RSVP tunnel interface. Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
