Luis. See the data sheet regarding virtual-router and BGP neighbor
limits (http://www.juniper.net/products/jseries/dsheet/100206.pdf). I
imagine these are very conservative values but you may run into issues
with JTAC if you exceed them and have to open a ticket (even on an
unrelated issue). Additionally you will need AFL if you want the J to
be a BGP RR.
david
David Waldman | Teliris | 55 Broadway New York, NY 10006 | O: +1
212.490.1065 x1306| F: +1 212.269-2869| M: +1 347.673.4707
This message is a PRIVATE communication. This message and all
attachments are a private communication, are confidential or protected
by privilege. If you are not the intended recipient, you are hereby
notified that any disclosure, copying, distribution or use of the
information contained in or attached to this message is strictly
prohibited. Please notify the sender of the delivery error by replying
to this message and then delete it from your system. Thank you.
On Nov 13, 2008, at 3:41 PM, luis barrios wrote:
Hello ..
My question is about J6350, Can i we use a J6350 route as a PE
router on an
MPLS network. I was checking the performance of the J6350 but im
not sure.
I need vpls, pseudo-wired and ipvpns, actually i need a robust
equiment on
the core maybe m10 or m120, but in the distribution layer maybe
J6350. The
J6350 maybe is a small router for a 50 customers and maybe a lot of
that
customer need vpls. And a m7i could be perfect but the price is not
the
best option. Anyone have seen the performance on the real world
of the
J6350 ..
thanks for your comments
luchobar
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
