I dont run any IGP, just IBGP. Brendan Mannella President and CEO TeraSwitch Networks Inc. Ph: 412-387-3543 Mobile: 412-592-7848 Efax: 412-202-7094
----- Original Message ----- From: "Aaron Dewell" <[EMAIL PROTECTED]> To: "Brendan Mannella" <[EMAIL PROTECTED]> Cc: [email protected] Sent: Monday, November 24, 2008 8:40:39 PM GMT -05:00 US/Canada Eastern Subject: Re: [j-nsp] Redistribute Connected You'll need an export policy, which if you want to redistribute all connected routes into BGP, you can match on from protocol direct, or you can match on your specific route, then accept. Of course, the route will then be propagated to the other transit, unless you have a policy preventing that on the other router. Are you sure you don't want that interface routes in your IGP instead of iBGP? Aaron On Mon, 2008-11-24 at 20:25 -0500, Brendan Mannella wrote: > Hello, > > I am working with two M7is running EBGP with a transit on each, and IBGP > between the two routers. When i create a new sub interface with a ip and vlan > on one router the route is not being advertised to the other router via IBGP. > I assume i need some policy for that. Can anyone shed any light on how to do > this? > > Thanks, > > Brendan > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
