On Wed, Nov 26, 2008 at 08:04:30AM -0800, Maurice Gil Cruz wrote:
> I just would like to know the equivalent of the cisco command
> "network <ip> mask <mask>"
> in juniper. If there is none, I would like to know as to how junos is able to
> advertise the routes without declaring the networks/unicast addresses to be
> advertised.
First create an aggregate or static reject route to represent your
network:
[edit routing-options static]
route <ip>/<mask> {
reject;
}
OR:
[edit routing-options aggregate]
route <ip>/<mask>;
Then create a policy to accept your route(s):
[edit policy-options policy-statement ORIGINATE]
term ORIGINATE {
from {
protocol [ static aggregate ];
route-filter <ip>/<mask> exact;
}
then accept;
}
term REJECT {
then reject;
}
and apply it to BGP:
[edit protocols bgp group EBGP]
export ORIGINATE;
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
