hello
i have configured a bgp/mpls vpn which lokks like this:
address-family vpnv4 unicast
no check-vpn-next-hops
neighbor x.x.x.x activate
address-family ipv4 unicast vrf test
no synchronization
no auto-summary
redistribute rip
redistribute connected
redistribute access
redistribute access-internal
exit-address-family
when i issue the command /show ip bgp summary /i see at the output
*Default IPv4-unicast is enabled*
is there a way to disable that so i can only receive vpv4 routes and not
ipv4?
Thank you
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
