On 16 Dec 2008 at 12:24, Tom Storey wrote: [...] > Can anyone confirm if DDR400 will work with a J2300? I understand this is > able to fall back to DDR266.
Yep, that's just the spec. The clock is supplied by the chipset. If I'd planned ahead I would have used the memory I pulled from my SSG 550 in my J2300, but I'd already purchased more (identical sticks from Crucial). It's DDR (i.e. DDR1), non-ECC. If you use a memory selector, just choose an Intel 845G motherboard. I prefer Crucial as Juniper uses Micron sticks, but that's just paranoia. Theoretically the chipset will support >1GB, but I haven't tried more in the J2300. While the forwarding process sucks up a tremendous amount or RAM, I doubt >1GB (to achieve >512MB free when idle/unconfigured) would buy you much. [...] Peter E. Fry _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
