with extendend-vlan-ccc encapsulation you can use both family inet and family ccc under different units. you can use family ccc with vlan-id > 512.
On Thu, Dec 18, 2008 at 1:48 AM, Simon Chen <[email protected]> wrote: > On Wed, Dec 17, 2008 at 5:37 PM, snort bsd <[email protected]> wrote: > > Hi, all: > > > > I am trying to configure an interface with L2VPN and kept getting error: > > > > > > interfaces { > > fe-0/0/1 { > > vlan-tagging; > > encapsulation vlan-ccc; > > unit 5 { > > vlan-id 5; > > family inet { > > address 10.0.0.5/30; > > } > > } > > unit 513 { > > encapsulation vlan-ccc; > > vlan-id 513; > > family ccc; > > } > > } > > } > > > > u...@lab4# commit > > [edit interfaces fe-0/0/1 unit 513] > > 'family' > > Only the CCC family is allowed on CCC interfaces > > error: configuration check-out failed > > > > > > Could anyone tell me what I did wrong? > > > > Model: m7i > > JUNOS Base OS boot [8.4R4.2] > > JUNOS Base OS Software Suite [8.4R4.2] > > JUNOS Kernel Software Suite [8.4R4.2] > > JUNOS Crypto Software Suite [8.4R4.2] > > JUNOS Packet Forwarding Engine Support (M/T Common) [8.4R4.2] > > JUNOS Packet Forwarding Engine Support (M7i/M10i) [8.4R4.2] > > JUNOS Online Documentation [8.4R4.2] > > JUNOS Routing Software Suite [8.4R4.2] > > > > > > > > > > > > Send instant messages to your online friends > http://au.messenger.yahoo.com > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > You can't use two different encapsulations on the same fe interface. > You can only do this on newer ge interfaces, where you can enable > flexible encapsulation. > > -Simon > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
