Thanks for the update on this. How about running MPLS label switching (P) on
E3 IQ PICS and using PB-4FE-TX/PE-4FE-TX as PE customer edge. 

The question is what MPLS applications (VPLS, L3VPN "RFC 2527bis, Multicast
over MPLS L3VPN/VPLS" are supported in such infrastructure. 



-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of [email protected]
Sent: Thursday, December 25, 2008 3:31 AM
To: [email protected]
Cc: [email protected]
Subject: Re: [j-nsp] VPLS support on Fast Ethernet

> > Does VPLS supported on Juniper Fast Ethernet PB-4FE-TX/PE-4FE-TX?
> 
> No.

I stand corrected here. VPLS is possible on FE ports using LSI
interfaces (no-tunnel-services configured under the VPLS instance).
This carries some restrictions compared to using IQ interfaces and
tunnel PICs.

Steinar Haug, Nethelp consulting, [email protected]
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp

_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to