Does anyone have experience in utilizing aggregates, for instance LACP, on Juniper firewalls? As a smaller provider trying to scale beyond 1Gbps without moving to 10GbE, I'm finding the information on this architectural issue a little scarce.
We can take in an aggregate from our upstream starting at 2Gbps, scaling upwards in 1Gbps increments utilizing LACP. The next step is to jump to 10GbE. Going the aggregate route, the full forwarding path through the Juniper firewalls needs to scale accordingly. ISGs seem to support 2Gbps and 4Gbps stateful filtering respectively, but I couldn't find documentation on aggregates. The next jump is to the 5200 which supports 2 x 10GbE and 10Gbps stateful filtering, after that the 5400 at 4 x 10GbE and 30Gbps stateful filtering all the way up to the SRX for far beyond our needs. Has anyone dealt with this stateful filtering throughput scaling issue, and if so do you have any pointers if there's a reasonable solution utilizing Juniper firewalls or maybe even other solutions. Thanks, Tom. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp

