VPDN terminology in Cisco really equates to a concept rather than a
technology. The tunneling technology is L2TP or L2F. If you are
looking to offer IP termination of DSL lines, then you likely want to
use L2TP and be the "LNS" while the wholesaling provider will maintain
the LAC. The JUNOSe documentation in the BRAS section will fill in
some details on how this works.
Basically, you can terminate the users into specific VPN contexts
(virtual-routers or VRFS) by associating RADIUS VSAs of the
appropriate routing context against the usernames.
You can also terminate L2TP subscribers on JUNOS platforms (acting as
LNS).
Truman
On 8/01/2009, at 11:39 AM, Matthias Gelbhardt wrote:
Hi!
We would like to offer DSL lines to our customers and have a
provider of these lines on hand. They use a VPDN over a L2TP tunnel
for the DSL lines. I was searching which is the equivalent of VPDN
on the juniper side, as there examples are all cisco examples.
Regards,
Matthias
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
