You are concerned about DoS attacks against a key perimeter router in your company. Configure router so that it limits the aggregate rate of ARP traffic toward the route processor to 75 packets per second. Routing control traffic marked with an IP Precedence value of 6 should be limited to 100 packets per second. How do you do this in JUNOS?
Here is the way you do on Cisco router: class-map match-all RP match ip precedence 6 class-map match-all ARP match protocol arp ! ! policy-map CoPP class ARP police rate 75 pps class RP police rate 100 pps ! control-plane ! service-policy input CoPP _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
