Using 'encapsulation ethernet-ccc' on your MX ints for transparency ? David B
2009/2/11 Joseph Soricelli <[email protected]>: > All- > > Got a simple L2VPN setup with some 7609 as CE and MX480 (9.2R3) as PE (no P > boxes). > > 7609----MX480-1----MX480-2----7609 > CE PE PE CE > > > L2VPN comes up with no issues. In troubleshooting some intermittent ping and > L3 issues from the 7609 side I notice that the switches do not see each > other via CDP, nor to they seem to be seeing each other via STP. > > It hasn't been THAT long since I was doing one of these last but I'll be > darned if I can recall this specific tidbit. So, am I crazy, or should those > packets be passed through the L2VPN just fine? > > As a side note, I think the problem might actually be on the 7609 side since > I see output packet stats on the PE but no inbound packet stats on the CE. > But, I gotta make sure my STP/CDP assumption is correct before I start > throwing stones! ;-) > > Thanks, > Joe > > Joseph Soricelli > JNCIE #14/ CCIE #4803 > 703-980-3999 > [email protected] > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
