Hello!
>Looking for a little verification here. I know that with an SSG-M >platform you can choose to run either JUNOS-ES or ScreenOS. Can the >same be said for the J-series routers? Yes. J series can run Junos for Jseries, Junos ES or ScreenOS. SSG-M hardware and J routers is exact same hardware (unless you have the old Avaya Telephone thingie installed which came with some J series bundles). But you need to be aware. The upgrade (downgrade? :-) between ScreenOS and JUNOS (whether it is JUNOS or JUNOS ES) can be done without a compactflash swap only in one direction. I think JUNOS can install on ScreenOS. But if you want to install ScreenOS, you need a new clean flash. (or if it all was the other way around) Cheers Patrik JNCIS-M, JNCIS-ES
BEGIN:VCARD VERSION:2.1 N:Olsson;Patrik FN:Patrik Olsson ORG:;EMEA Tech Dev TEL;WORK;VOICE:+46-733927834 TEL;CELL;VOICE:+46-733927834 ADR;WORK:;Stockholm;Arstaangsvagen 1A, bv;Stockholm;;S11743;Sweden LABEL;WORK;ENCODING=QUOTED-PRINTABLE:Stockholm=0D=0AArstaangsvagen 1A, bv=0D=0AStockholm S11743=0D=0ASweden EMAIL;PREF;INTERNET:[email protected] REV:20070904T103433Z END:VCARD
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
