Is it the traffic coming in from "pacnet" vrf that you are trying to
load balance when going over as1 towards MPLS cloud? If so, I think you
should configure "family inet" hashing as well on the PE.
Thanks,
Nilesh
As ad Arafat wrote:
Hi Nilesh,
I attached "show route a.b.c.d extensive" and "show route
forwarding-table destination a.b.c.d extensive"
i use hash like this.
hash-key {
family mpls {
label-1;
payload {
ip;
}
}
}
On Wed, Feb 18, 2009 at 12:03 PM, Nilesh Khambal <[email protected]> wrote:
Can you please send the output of below 2 commands for the destination that
you want to load balance?
"show route a.b.c.d extensive"
"show route forwarding-table destination a.b.c.d extensive"
What kind of hashing have you configured under "edit forwarding-options"?
Thanks,
Nilesh.
As ad Arafat wrote:
Hi list,
I got m7i and m10i linked aggregated sonet interface with 2 sonet
interface inside it.
I already add load-balancing per-packet policy and forwarding-option
cinfiguration
But one of sonet interface seem underutilized.
Any workaround for this issue?
Best Regads
Asad
------------------------------------------------------------------------
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
