Hi techies, lot of mail has been exchanged regarding DCU/SCU configs , i m able to get the desired valued both for destination class as well as source class . when i initiate the command walk with below OID on MRTG server as well as router we are getting the same output corresponding to OID .
but we are not able to plot the data on MRTG server by calling the values available in below output , can some has done the same on MRTG server . is it required to load mib-jnx-dcu on MRTG server to plot the data or some other is required . outputs from router sh...@mum-isp> show snmp mib walk .1.3.6.1.4.1.2636.3.16 jnxScuStatsPackets.159.1.12.115.99.117.95.99.117.115.116.111.109.101.114 = 903057298 jnxScuStatsPackets.159.1.20.100.101.102.97.117.108.116.95.115.99.117.95.99.117.115.116.111.109.101.114 = 139440829 jnxScuStatsPackets.201.1.12.115.99.117.95.99.117.115.116.111.109.101.114 = 2736592 jnxScuStatsPackets.201.1.20.100.101.102.97.117.108.116.95.115.99.117.95.99.117.115.116.111.109.101.114 = 929812042 jnxScuStatsPackets.668.1.12.115.99.117.95.99.117.115.116.111.109.101.114 = 113309211 jnxScuStatsPackets.668.1.20.100.101.102.97.117.108.116.95.115.99.117.95.99.117.115.116.111.109.101.114 = 31745205 jnxScuStatsPackets.691.1.12.115.99.117.95.99.117.115.116.111.109.101.114 = 2882548 jnxScuStatsPackets.691.1.20.100.101.102.97.117.108.116.95.115.99.117.95.99.117.115.116.111.109.101.114 = 913450852 jnxScuStatsPackets.691.1.20.100.101.102.97.117.108.116.95.115.99.117.95.99.117.115.116.111.109.101.114 unable to create internal request sh...@mum-isp> show snmp mib walk .1.3.6.1.4.1.2636.3.6 jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUSrcIfIndex.668.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 668 jnxDCUSrcIfIndex.668.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 668 jnxDCUSrcIfIndex.716.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 716 jnxDCUSrcIfIndex.716.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 716 jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = default_class jnxDCUDstClassName.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = dest_class jnxDCUDstClassName.668.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = default_class jnxDCUDstClassName.668.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = dest_class jnxDCUDstClassName.716.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = default_class jnxDCUDstClassName.716.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = dest_class jnxDCUDstClassName.716.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 unable to create internal request ---------- Forwarded message ---------- From: shariq qamar <[email protected]> Date: Feb 23, 2009 11:38 AM Subject: Re: [j-nsp] snmp oid for polling DCU To: Ebben Aries <[email protected]>, [email protected] Dear Ebben , please help me out , we implement DCU and also get the data accordingly to get the values but my SNMP server team is not able to uunderstand what value they suppose to grap to plot the data . blew are few outputs which i get from the walk of OID . {master} 17347...@mum-isp-aggr-rtr- show snmp mib walk .1.3.6.1.4.1.2636.3.6 jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = default_class jnxDCUDstClassName.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = dest_class jnxDCUPackets.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 615392244 jnxDCUPackets.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 21986324 jnxDCUBytes.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 166312660826 jnxDCUBytes.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 8027259994 jnxDcuStatsPackets.159.1.10.100.101.115.116.95.99.108.97.115.115 = 21986324 jnxDcuStatsPackets.159.1.13.100.101.102.97.117.108.116.95.99.108.97.115.115 = 615392572 jnxDcuStatsBytes.159.1.10.100.101.115.116.95.99.108.97.115.115 = 8027259994 jnxDcuStatsBytes.159.1.13.100.101.102.97.117.108.116.95.99.108.97.115.115 = 166312728017 jnxDcuStatsClName.159.1.10.100.101.115.116.95.99.108.97.115.115 = dest_class jnxDcuStatsClName.159.1.13.100.101.102.97.117.108.116.95.99.108.97.115.115 = default_class {master} 17347...@mum-isp-aggr-rtr- show snmp mib walk .1.3.6.1.4.1.2636.3.6 jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = default_class jnxDCUDstClassName.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = dest_class jnxDCUPackets.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 615396852 jnxDCUPackets.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 21986325 jnxDCUPackets.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 unable to create internal request {master} 17347...@mum-isp-aggr-rtr- show snmp mib walk .1.3.6.1.4.1.2636.3.6 jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = default_class jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 unable to create internal request {master} 17347...@mum-isp-aggr-rtr- show snmp mib walk .1.3.6.1.4.1.2636.3.6 jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = default_class jnxDCUDstClassName.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = dest_class jnxDCUPackets.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 615412410 jnxDCUPackets.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 21986335 jnxDCUBytes.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 166317433041 jnxDCUBytes.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 8027264599 jnxDCUBytes.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 unable to create internal request {master} 17347...@mum-isp-aggr-rtr- show snmp mib walk .1.3.6.1.4.1.2636.3.6 jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = default_class jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 unable to create internal request {master} On 2/17/09, Ebben Aries <[email protected]> wrote: > > You will most likely find what you are looking for in > JUNIPER-DCU-MIB:: (.1.3.6.1.4.1.2636.3.6) > > On Mon, Feb 16, 2009 at 5:46 AM, shariq qamar <[email protected]> > wrote: > > Dear Techies , > > > > I m done with QPPB configuration on my Juniper M320 box junos 8.5R3.4 > > and successfully able to get counters for the destination calss > > i want to see the plot of counters via SNMP server . > > > > will anybody explain me how to get OID's values in juniper . > > what is the way to get OID's value for DCU so that same we poll via SNMP > > server > > > > > > -- > > Regards, > > Shariq Qamar, > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > -- Regards, Shariq Qamar, -- Regards, Shariq Qamar, _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
