Experts,
do you know if and how to extend the FPC range in order to avoid the following
nasty error?
The interface of course will not be physically present in olive, but this will
allow to validate the config anyway.
Also a solution could be to disable the FPC value check at all, if I only knew
how to do it......
Cheers,
The Dark One
l...@olive-02# set protocols pim interface ge-7/2/0.0
^
fpc value outside range 0..5 for '7/2/0.0' in 'ge-7/2/0.0' at 'ge-7/2/0.0'
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
