If I were you I'd turn on some OSPF traceoptions ... it might tell you
why it's not working
cheers
Sean
On 3/27/09 11:58 AM, Aamir Saleem wrote:
Hi All,
I am having problem to established NBMA relationship between two P2P SONET
interfaces with frame-relay encapsulation. Can anyone tell me what is wrong
with the following interface and ospf configuration or what else need to be
added to have neighbor established. I am able to ping P2P ips and NBMA is
working fine on multipoint interface configuration.
*A-END Configuration*
LAB1<r...@lab1># show interfaces so-0/2/1
hold-time up 30 down 30;
encapsulation frame-relay;
lmi {
n391dte 1;
n392dte 2;
n393dte 3;
t391dte 15;
lmi-type itu;
}
unit 0 {
dlci 100;
family inet {
address 10.0.2.5/30;
}
}
[edit]
LAB1<r...@lab1># show protocols ospf
area 0.0.0.0 {
interface so-0/2/1.0 {
interface-type nbma;
neighbor 10.0.2.6 eligible;
}
}
[edit]
LAB1<aa...@lab1>#
*B-END Configuration*
**
LAB2<r...@lab2># show interfaces so-0/2/1
dce;
hold-time up 30 down 30;
encapsulation frame-relay;
lmi {
n392dce 2;
n393dce 3;
t392dce 25;
lmi-type itu;
}
unit 0 {
dlci 100;
family inet {
address 10.0.2.6/30;
}
}
[edit]
LAB2<r...@lab2># show protocols ospf
area 0.0.0.0 {
interface so-0/2/1.0 {
interface-type nbma;
neighbor 10.0.2.5 eligible;
}
}
[edit]
LAB2<aa...@lab2>#
some ospf outputs
LAB1<r...@lab1># run show ospf interface
Interface State Area DR ID BDR ID
Nbrs
so-0/2/1.0 DR 0.0.0.0 10.0.5.1
0.0.0.0 0
so-0/2/1.0 DR 0.0.0.0 10.0.5.1
0.0.0.0 1
[edit]
aa...@lab1# run show ospf neighbor
Address Interface State ID Pri Dead
10.0.2.6 so-0/2/1.0 Down 0.0.0.0 0 0
10.0.2.6 so-0/2/1.0 Attempt 0.0.0.0 0 0
[edit]
aa...@lab1#
Why we have two interface and neighbor entries in "show ospf interface" and
"show ospf neighbor"?
Regards.
Aamir
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
