Media converters can be tricky and the devil is in the detail. * Do you need to be able to disable auto-negotiation? Not all media converters can do this. * Are you trying to connect a 1000Base router port to a 100Base converter? * If you're converting to copper, the converter may or may not support auto-MDI/MDI-X. Use appropriate cabling * Power on order. Some converters like to be powered on before being patched. Others don't care. * Many Transition converters support transparent link pass through. If you don't need this, try toggling it off.
I realize this isn't the media converter NSP list. Apologies if this is off-topic. -Jason On Thu, Apr 9, 2009 at 8:15 AM, Andy Vance <[email protected]> wrote: > I've seen this in the past with media converters and was able to work around > it using > > gigether-options { > no-auto-negotiation; > > Hope that helps, > Andy > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Ozgur Guler > Sent: Thursday, April 09, 2009 7:58 AM > To: [email protected] > Subject: [j-nsp] DPC-R-40GE-SFP and Transition Media Converter > > > > Hi All, > > I am having a problem to get the line protocol up between Juniper > DPC-R-40GE-SFP and my media converter (Transition multimode SFP). Has anyone > seen this previously? Is there a way to solve this ? > > Thanks > Ozgur > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
