Thanks Steiner, This is a realized truth. I knew that Juniper did not support EIGRP, or IGRP. This thread was rhetorical at best. I just needed some external reflection from the forum. Thanks dude.
Jay Murphy IP Network Specialist NM Department of Health ITSD - IP Network Operations Santa Fe, New Mexico 87502 Bus. Ph.: 505.827.2851 "We move the information that moves your world." -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, April 15, 2009 2:47 PM To: Murphy, Jay, DOH Cc: [email protected] Subject: Re: [j-nsp] EIGRP > Will someone from Juniper confirm that your product line does not support EIGRP or IGRP for that matter? You can find out this for yourself by reading the manuals. Here is the main page for the latest version of JunOS, 9.5: http://www.juniper.net/techpubs/software/junos/junos95/index.html Go to the "Routing Protocols", and look at contents in the left hand frame. Observe the complete lack of any mention of IGRP or EIGRP. Your IGP choices are OSPF or IS-IS. Possibly RIPv2 if you're a masochist... Steinar Haug, Nethelp consulting, [email protected] ______________________________________________________________________ This inbound email has been scanned by the MessageLabs Email Security System. ______________________________________________________________________ Confidentiality Notice: This e-mail, including all attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited unless specifically provided under the New Mexico Inspection of Public Records Act. If you are not the intended recipient, please contact the sender and destroy all copies of this message. -- This email has been scanned by the Sybari - Antigen Email System. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
