Greetings,
I recently upgraded a J-series 6350 from 8.4 to 9.2, and it appears that it is
no longer exporting, or properly exporting, version 5 flows. I'm at a loss,
since the documentation on Juniper's site is simply wrong for the J-series --
ie. commands listed do not exist. Here's a redacted snippet of the appropriate
sections:
s...@router> show configuration forwarding-options
sampling {
input {
family inet {
rate 50;
run-length 0;
max-packets-per-second 1000;
}
}
output {
cflowd 10.52.135.6 {
port 2055;
source-address 10.51.100.2;
version 5;
no-local-dump;
autonomous-system-type origin;
}
}
}
s...@router> show configuration interfaces ge-0/0/3 unit 5
bandwidth 1g;
vlan-id 5;
family inet {
sampling {
input;
output;
}
address xxx.xxx.xxx.xxx/xx
}
Thoughts?
-- Stephen
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
