Thanks guys for your answers. BR
Robert On Sat, Apr 18, 2009 at 5:48 PM, Erdem Sener <[email protected]> wrote: > Hi, > > AFAIK lt- interfaces are treated like any other interface from a > firewall/policer and CoS perspective; e.g: > > unit 0 { > encapsulation ethernet; > peer-unit 1; > family inet { > policer { > input policer_500meg; > output policer_500meg; > } > address 12.12.12.1/30; > } > } > > router> show interfaces lt-11/3/0.0 extensive | match policer > Policer: Input: policer_500meg-lt-11/3/0.0-inet-i, Output: > policer_500meg-lt-11/3/0.0-inet-o > > Furthermore, in a MX platform, you can use a port in 'tunnel services' > mode (without requiring > a services (tunnel, AS, MS) PIC, where you can also specify the > bandwitdh, such as: > > er...@mx-re0# show chassis > redundancy { > failover { > on-loss-of-keepalives; > } > graceful-switchover; > } > routing-engine { > on-disk-failure disk-failure-action reboot; > } > fpc 11 { > pic 3 { > tunnel-services { > bandwidth 10g; #### this is a 10gig ethernet port > } > } > } > > er...@mx-re0# set chassis fpc 11 pic 3 tunnel-services bandwidth ? > Possible completions: > 1g 1 gigabit per second <<<<<< you may choose to > use it as a 1gig 'tunnel' interface. > 10g 10 gigabits per second > > This would effectively create interfaces such as vt-11/3/0, lt-11/3/0, > gr-11/3/0, mt-11/3/0 etc. > > HTH, > Erdem > > > On Sat, Apr 18, 2009 at 5:22 PM, Stacy W. Smith <[email protected]> wrote: > > There are different Tunnel PICs depending upon the type of FPC in which > they > > are being installed. Each of these offer differing amounts of tunnel > > bandwidth. The PB-TUNNEL is for Type 3 FPCs and is inherently limited to > > 10Gbps of tunneling bandwidth. See page 3 of > > http://www.juniper.net/us/en/local/pdf/datasheets/1000092-en.pdf for > more > > details. > > > > I'm pretty QOS illiterate, so I don't know if you might be able to apply > > policers to lt interfaces to further limit the bandwidth. Maybe someone > else > > can comment on this. > > > > --Stacy > > > > > > On Apr 18, 2009, at 3:44 AM, Robert Kern wrote: > > > >> Hi Stacy, > >> > >> thanks for answer. Is there a way to limit the traffic between > >> logical-routers to 10Ge for example and what is the bandwidth limitation > for > >> a tunnel between LRs. > >> > >> Regards, > >> > >> Robert > >> > >> On Sat, Apr 18, 2009 at 7:29 AM, Stacy W. Smith <[email protected]> wrote: > >> > >> On Apr 17, 2009, at 10:57 PM, Robert Kern wrote: > >> > >> Hi Guys, > >> > >> I have a question about interconnection logical-routers on M320 via > >> FPC3-E. > >> Interconnection should be internal (not via physical ports) and limited > to > >> 10Ge for example. > >> > >> What kind of configuration do I need for such logical connection - I > >> belive > >> no other HW is needed for that. > >> > >> Tnx for answers. > >> > >> Robert > >> > >> You need a logical tunnel (lt) interface. That requires either a tunnel > >> PIC, AS PIC, or MS PIC. > >> > >> Assuming you have an lt interface, the configuration looks like this: > >> > >> logical-systems { > >> R11 { > >> interfaces { > >> lt-1/1/0 { > >> unit 2 { > >> description "R11 LR to Default LR on unit 1"; > >> encapsulation vlan; > >> vlan-id 1; > >> peer-unit 1; > >> family inet { > >> address 192.168.21.6/30; > >> } > >> } > >> } > >> } > >> } > >> } > >> interfaces { > >> lt-1/1/0 { > >> unit 1 { > >> description "Default LR to R11 LR on unit 2"; > >> encapsulation vlan; > >> vlan-id 1; > >> peer-unit 2; > >> family inet { > >> address 192.168.21.5/30; > >> } > >> } > >> } > >> } > >> > >> --Stacy > >> > >> > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
