Richard A Steenbergen skrev:
On Fri, Apr 17, 2009 at 11:43:16AM -0700, Joe Abley wrote:
This is what I tried. What did I do wrong?
interfaces {
ge-0/0/1 {
description d1.lab1;
unit 0;
}
set unit 0 family bridge
http://junos.juniper.net/content/Resources/!Rebranded_Resources/DC_implementation_guide.pdf
I don't know if that differs from my setup - I know that this one works:
interfaces {
ge-0/0/1 {
description "something";
encapsulation ethernet-bridge;
unit 0;
}
ge-0/0/2 {
description "something else";
encapsulation ethernet-bridge;
unit 0;
}
/BT
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
