Hi, we have two SSG 520M firewalls and two ex4200 switches
[ SSG520M fw1 ][eth1/7] ----- [ge-0/0/3][ ex4200 sw1 ][ge-0/1/2]===trunk===[ge-0/1/2][ ex4200 sw2 ][ge-0/0/3] ---- [eth1/7][ SSG520M fw2 ]
I want to configure HA between fw1 and fw2 the problem is that sw2 doesn't see fw1 sw1>show ethernet-switching table vlan ha-vlan Ethernet-switching table: 2 unicast entries VLAN MAC address Type Age Interfaces ha-vlan * Flood - All-members ha-vlan 00:22:83:88:38:15 Learn 0 ge-0/0/3.0 ha-vlan 00:22:83:88:3f:15 Learn 0 ge-0/1/2.0 sw2> show ethernet-switching table vlan ha-vlan Ethernet-switching table: 1 unicast entries VLAN MAC address Type Age Interfaces ha-vlan * Flood - All-members ha-vlan 00:22:83:88:3f:15 Learn 0 ge-0/0/3.0 both switches have same config and same junos version. IGMP snooping is disable for all VLANs -- Yordan Boikov :wq _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
