Thanks for the reply. So WEBKOM is community the one you send along with traps to snmp manager for authentication. Correct!
-----Original Message----- From: Patrik Olsson [mailto:[email protected]] Sent: Thursday, April 30, 2009 11:45 AM To: Andrew Jimmy Cc: [email protected] Subject: Re: [j-nsp] snmp-trap community The definition of the traps community is the name of the trap-group you are configuring... For example, this is my trap group WEBKOM: trap-group WEBKOM { version all; categories { authentication; chassis; link; remote-operations; routing; startup; rmon-alarm; vrrp-events; configuration; services; sonet-alarms; } targets { 192.168.142.150; } } Best Patrik Andrew Jimmy wrote: > You can set the snmp community in JUNOS using.. 'set snmp community public > authorization read-only'.. But it's for pooling OK > > You know when you configure snmp traps you define a community for trap > manager..I have configure my trap settings like show be > > low. > > Set trap-group auth-traps targets 5.6.7.8 > > Set trap-group auth-traps categories authentication > > > > Now where do you define community for trap manager so that you can get > authenticated when you send traps to trap manager from router. > > > > > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- //Patrik Webkom http://www.webkom.se +46 (0)709 35 22 99 +46 (0)8 559 26 488 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
