reboot the SRC, and upgrade to the latest patch is a best way.
It should be a bug under that version.
----- Original Message -----
From: "Joe Shen" <[email protected]>
To: <[email protected]>
Sent: Friday, May 08, 2009 5:33 PM
Subject: [j-nsp] Juniper C2K CLI hang up after login
hi,
we use juniper C2K with E320.
Today I found I could not login C2k.
After login , the cli hang up without showing out command prompt.
it looks like :
--- SRC CLI 2.0 build CLI.R.2.0.0.003
(c) 2005-2008 Juniper Networks Inc.
^]
I tried with Ctrl+Break but no response got.
How could i get back normal operation as before?
thanks in advance.
Joe
___________________________________________________________
好玩贺卡等你发，邮箱贺卡全新上线！
http://card.mail.cn.yahoo.com/
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
