Hi Willian, one way to do this is use forwarding-options:
http://www.juniper.net/techpubs/software/junos/junos92/swconfig-cos/configuring-forwarding-policy-options.html#id-10989130 http://www.juniper.net/techpubs/software/junos/junos92/swconfig-cos/example-configuring-cos-based-forwarding-for-different-traffictypes.html#id-policy-example2 Thanks ./diogo -montagner On Fri, May 15, 2009 at 5:10 AM, William Jackson <[email protected]> wrote: > I am wading my way through the JNCIS-M book and cant find a suitable > answer to the following question: > > > > Imagine I have an MPLS network and I have multiple services running > between the same two PE routers > > > > I define multiple RSVP-TE LSPs with different primary and backup paths, > bandwidth allocations etc. > > > > >From what I see in the book it associates the LSP's with the remote PE's > loopback, so by default on the local PE everything will use the same > single LSP to reach the remote PE router? > > Thus all services that need to go to that remote PE will go via the same > LSP? > > > > How do specify a particular VPN to use a specific LSP? > > > > thanks > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
