Hi,
I was wondering what the best way to limit bandwidth per customer port on a
EX3200 would be.
Lets say i have customer A on port 3 and customer B on port 4 and would like to
give each one 10 mbits per sec up and down. Something like this...
ge-0/0/3 {
description Customer A;
unit 0 {
family ethernet-switching {
port-mode access;
vlan {
members 43;
ge-0/0/4 {
description Customer B;
unit 0 {
family ethernet-switching {
port-mode access;
vlan {
members 44 ;
firewall {
policer 10m {
if-exceeding {
bandwidth-limit 10m;
burst-size-limit 100k;
}
then discard;
Then i would just apply the 10m policer to both interfaces for both input and
output?
Any clarification on this would be helpful.
Thanks,
Brendan
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
