As to my understanding l2circuit just needs encap vlan-ccc on em...i can unicast the configs.
As suggested earlier TCC/l2vpn/Vpls doesn't work. On Fri, May 29, 2009 at 8:27 AM, Truman Boyes <[email protected]> wrote: > fxp or em interfaces do not support family ccc or tcc. > > > > On 29/05/2009, at 1:48 AM, alaerte vidali wrote: > > Hi Thiago, >> What version are you using? If want, send the config ( >> [email protected]) and I try on mine. >> I tested L3VPN recently (works fine), but I heard something about >> L2VPN/VPLS >> does not work, as one person posted already. >> >> Br, >> Alaerte >> >> On Thu, May 28, 2009 at 10:08 AM, <[email protected] >> >wrote: >> >> >>> -----Original Message----- >>>>> From: [email protected] [mailto: >>>>> >>>> [email protected]] On Behalf Of Thiago Drechsel >>>> >>>>> Sent: Wednesday, May 27, 2009 6:03 AM >>>>> To: [email protected] >>>>> Subject: [j-nsp] Olive and l2circuit >>>>> >>>>> Hi list. >>>>> >>>>> Was anybody able to configure/test l2circuit using olive running on >>>>> >>>> virtual machines? >>>> >>>>> A have a basic topology, for study purposes, everything is correctly >>>>> >>>> configured but traffic don't go through the pw. >>>> >>>>> >>>>> Any similar experience on the list? >>>>> >>>>> Thank you! >>>>> >>>>> Thiago >>>>> _______________________________________________ >>>>> >>>> >>> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
