Why would you want to do that? Labels are used only inside your backbone where you have the same QoS policy in all the routers. It's going to be a burden to configure QoS policies on interfaces because you will have to think "is this router doing the PHP or not?"
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Li Zhu Sent: Sunday, June 07, 2009 7:46 PM To: [email protected] Cc: [email protected] Subject: Re: [j-nsp] MPLS EXP bit marking question Masood, Nugroho Thank you for the reply. I agree with both of you that rewrite takes effect on both inner and outer mpls label. My next question is: what if I want to mark inner and outer MPLS label differently? Say I want mark the inner exp with 5 and outer exp with 6? Is it possible to achieve this? Thanks, Li On Sun, Jun 7, 2009 at 4:10 PM, <[email protected]> wrote: > the rewrite-rule will take effect on both tags and all the labels in label > stack. > > Regards, > Masood > > > All, > > > > There is a network like CE --- PE --- P. The PE is M320. Traffic is from > > CE > > to P. The traffic out of CE is native IP, after it reaches and gets out > PE > > (then to P), it is double-tagged with MPLS lable. There is a exp > > rewrite-rule applied on PE link to P router. My questions is > > will the rewrite-rule take effect on both tags or only the outer tag? > > > > Thanks, > > > > Li > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
