Hi Hoogen,
You can accomplish this on J-series with legacy JUNOS (not JUNOS-ES/Enhanced
Services!). Use CCC and "interface-switch" feature
http://www.juniper.net/techpubs/software/junos/junos93/swconfig-mpls-apps/example-configuring-layer-2-switching-cross-connects.html#id-27264
This link is for CCC on JUNOS for M/T/MX-series but legacy JUNOS for
J-series works the same way. Don't forget to enable "protocols mpls
interface <whatever>".
Rgds
Alex
----- Original Message -----
From: "Hoogen" <[email protected]>
To: "Juniper certification" <[email protected]>;
<[email protected]>
Sent: Tuesday, July 14, 2009 3:04 AM
Subject: [j-nsp] Frame-relay Switching on J-Series
Hi Guys,
I have a lab that I am trying to setup, some basics here. I would like to
setup a J-Series to act like a Frame-relay switch. Could anyone direct me
to
some configurations? I am using T1 ports here and would like to get some
p2p
and p2m configurations. So some configurations would definitely help.
Thanks,
Hoogen
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
