I am not sure if this is right for you :) http://kb.juniper.net/kb/documents/public/junos_es/JUNOS_ES_Multipoint_VPN_with_NHTB.pdf
Regards, Masood > [apologies if you receive this on-list twice.] > > Hi all, > > Can anyone tell me what the equivalent functionality to DMVPN is in > the world of Juniper? > > I understand there's "ACVPN" available in ScreenOS, but does anyone > actually use this? Our local Juniper team didn't give us a warm, fuzzy > feeling about this feature. > > As a side note, is it true that the any-to-any dynamic IPSec > functionality that became DMVPN in Cisco world was actually developed > by NetScreen prior to being acquired by Juniper? Is it true the > functionality hasn't been developed to the same degree it has in IOS? > > We are looking at a (~60 site) deployment with Juniper CEs, using a > service provider's L3VPN product, but CE device selection is proving a > challenge -- we'd prefer not to roll out what seems to be a legacy > platform in the SSGs, but the functionality apparently isn't there yet > in JUNOS. Deploying hub-and-spoke in 2009 seems a bit backwards. > > If anyone has any anecdotes about ACVPN, or tips on how to achieve a > similar configuration using a JUNOS-based device, please chime in! :-) > The network will be supporting VoIP traffic, hence the any-to-any > connectivity requirement. > > cheers, > Dale > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
