On Fri, Jul 31, 2009 at 04:02:25PM +0200, Malte von dem Hagen wrote: > Hi there, I just like to share with you: > > It may be, the one or other of you reads the datasheet of EX3200/4200 switches > and runs over the following, unspectacular and expected passage with just a > slight nod: > > "Uplink modules can be installed without powering down the switch, enabling > users to add high-speed connectivity at any time or migrate from one uplink > type > to the other to deliver the ultimate in flexible, high-performance > interconnectivity." > > from http://www.juniper.net/us/en/local/pdf/datasheets/1000215-en.pdf > > The above is wrong and promises, what J can't keep: > http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/reference/general/uplink-module-ex3200-ex4200.html#jd0e161
Yeah, for ex-series OIR still means "Online Insert and Reboot", just like with old cisco's 7500... However, as far as I know, "true OIR" (without reboot) is roadmapped to Q4 2009. > > Very evil when you build Virtual Chassis and keep in mind "well, if I need > more > Uplink, I'll extend later...". > > Lesson learned: Don't believe just data sheets. Good to have redundant > switches. > > rgds, > > .m > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
