Thank you all for the reply. Do I need to explicitly configure MPLS LSPs between the PEs (using protocols/mpls/label-swithing-path)? Or just configure RSVP or LDP on the PEs so that LSPs can be automatically established by VPLS?
Thanks. -Simon On Thu, Aug 6, 2009 at 1:12 PM, Harry Reynolds<[email protected]> wrote: > Ldp can both signal vpls (ldp based vpls control plane) and establish lsps. > You either single vpls with ldp or bgp, and then transport via a lsp between > pes. This transport lsp can be rsvp or ldp signaled. > > Regards > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Simon Chen > Sent: Thursday, August 06, 2009 9:35 AM > To: [email protected] > Subject: [j-nsp] lsp required for vpls? > > Hi all, > > I read in the VPN configuration guide that LSPs between PEs are required for > VPLS. However, I am able to establish a VPLS setup using LDP signalling, but > without MPLS-LSP between PEs. > > Does anyone know why? My guess is that LSP is only required if you're going > for the BGP signalling, but not required if you're doing LDP. > Can anyone clarify this? > > Thanks. > -Simon > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
