That seems to be applicable to interfaces, not to vlans themselves. It did not return information on the filter I've applied to a vlan itself. Maybe I'm confusing something.
Dan -----Original Message----- From: Harry Reynolds [mailto:[email protected]] Sent: Tuesday, August 11, 2009 2:46 PM To: Dan Farrell; [email protected] Subject: RE: EX series VLAN filter verification Does show interfaces filters help? Regards -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dan Farrell Sent: Tuesday, August 11, 2009 11:25 AM To: [email protected] Subject: [j-nsp] EX series VLAN filter verification I've been getting closer to implementing filters on a particular EX3200 I'm using, and I noticed that the verification capabilities in the CLI for filters (specifically, where they are applied) is pretty weak. For instance, I can't find a standard way to see a list of what ports, interfaces, or vlans a particular filter is applied on. The best I can come up with is- >show configuration | display set | match filter | match vlan Is there way I'm missing that can give me the same (or somewhat similar) information? Thanks, Dan Farrell Director of Network Operations Applied Innovations Corp. [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
