Apart from using Cacti/HPOV capabilities to calculate % usage, etc you could
do this by writing an event-script that takes interface stats, does some
trivial math and populates Utility MIB (jnxUtil).
Rgds
Alex
----- Original Message -----
From: "harbor235" <[email protected]>
To: <[email protected]>
Sent: Thursday, August 13, 2009 2:06 PM
Subject: [j-nsp] monitor interface rate
To all,
I would like to monitor a juniper router interface via snmp, simple
enough.
However, I do not want bps, I want to monitor the interface as a
percentage
of it's total capacity. In the end I want to be notified if my interface
exceeds 70%
of capacity so I can initiate capacity management planning.
I know I can on an interface by interface basis figure out 70% and program
that into
each interface collection, however, that does not scale. Is there anyone
out
there
that knows of a MIB obect that does this?
thanx,
Mike
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
